This is the Biscotti Version of the Convoy S2+ with 8x 7135 chips unless otherwise specified.
There are a few different LEDs available but all models here are gray and have the rubber tail switch.
The SST20 4000k and 219c 4000k are high CRI models.
The light has a copper DTP board, anodized tail threads, either a smooth or orange peel reflector (variants are labeled SMO or OP), and an AR coated glass lens. It takes an 18650 battery. If you want a smooth reflector they can be ordered separately.
Not all colors will thread together. Convoy is currently transitioning to a new thread type, so some lights have the old style and some have the new style. If you need to lego them together, please send me an email to make sure color x will be compatible with color y. This issue will be remedied when the thread transition is complete.
A host for the S2+ platform. It includes:
1*OP or SMO reflector (see pictures for reference),1*pill,1*head O ring,1*glass,1*spring,1*lanyard
Some colors come with a gift box and clip.
Switch and color reference:
The following size of LED and driver (not included) fit this host: LED plate:Diameter 16mm Driver:Diameter 17mm
1st Mode - 100% Brightness (one tap of the switch to select)
2nd Mode - 35% Brightness (two quick taps)
3rd Mode - Strobe (three quick taps)
Switching on the flashlight will always start in the 1st Mode
For the 1st and 2nd Modes, tap the switch quickly 5 times to enter into a config menu. The brightness will start to smoothly adjust, tap the switch once to set the desired level of brightness. The light will flash once to indicate you've reached the highest brightness. If the switch isn't pressed at the highest brightness it'll change to the lowest level and begin to smoothly increase in brightness again.
For the 3rd Mode, tap the switch quickly 5 times to enter into a special config menu. The light will slowly blink, tap the switch to set the desired mode. Each blink represents the following modes
- 1. 1% Brightness
- 2. 100% Brightness
- 3. Strobe 100%
- 4. Beacon 100%
- 5. Slow Flash
- SOS 40% (no blink, it chooses automatically if an above mode isn't selected)
8 quick taps in any mode will restore the flashlight to the default settings.
A Stainless Steel clip for the Convoy Series of lights. It's compatible with the S3, M2, and C8. Having said that, I put it on an S2+ and it worked fine, so any of the convoys with the dual lanyard holes at the top may work.
Tip: If the clip is too loose or tight you can take it off and bend it slightly at the curved part.
There was an error signing up for restock notifications. Please try again.
This is a 3D printed display stand, similar to the wooden one I have in the store except 3D printed. The infill pattern is exposed on some of these because I think it looks cool. New versions may be added as I make more.
*Flashlight is not included.
Check out the "YardSale" for random and discounted items