1st Mode - 100% Brightness (one tap of the switch to select)
2nd Mode - 35% Brightness (two quick taps)
3rd Mode - Strobe (three quick taps)
Switching on the flashlight will always start in the 1st Mode
For the 1st and 2nd Modes, tap the switch quickly 5 times to enter into a config menu. The brightness will start to smoothly adjust, tap the switch once to set the desired level of brightness. The light will flash once to indicate you've reached the highest brightness. If the switch isn't pressed at the highest brightness it'll change to the lowest level and begin to smoothly increase in brightness again.
For the 3rd Mode, tap the switch quickly 5 times to enter into a special config menu. The light will slowly blink, tap the switch to set the desired mode. Each blink represents the following modes
- 1. 1% Brightness
- 2. 100% Brightness
- 3. Strobe 100%
- 4. Beacon 100%
- 5. Slow Flash
- SOS 40% (no blink, it chooses automatically if an above mode isn't selected)
8 quick taps in any mode will restore the flashlight to the default settings.
Gray has square threads, silver and orange has trapezoidal threads.
A short body tube for Convoy S2+ flashlights which will allow the use of 18350 batteries.
Important: It has been brought to my attention that these tubes are not exactly the same internal diameter at the original 18650 tube. This means some (if not all) protected 18350s, or anything with a thick wrapper may not fit. Unfortunately there is nothing I can do about this, that's just how Convoy makes them.
This is the Biscotti Version of the Convoy S2+ with 8x 7135 chips unless otherwise specified.
There are a few different LEDs available but all models here are gray and have the rubber tail switch.
The SST20 4000k and 219c 4000k are high CRI models.
The light has a copper DTP board, anodized tail threads, either a smooth or orange peel reflector (variants are labeled SMO or OP), and an AR coated glass lens. It takes an 18650 battery. If you want a smooth reflector they can be ordered separately.
Not all colors will thread together. Convoy is currently transitioning to a new thread type, so some lights have the old style and some have the new style. If you need to lego them together, please send me an email to make sure color x will be compatible with color y. This issue will be remedied when the thread transition is complete.
A host for the S2+ platform. It includes:
1*OP or SMO reflector (see pictures for reference),1*pill,1*head O ring,1*glass,1*spring,1*lanyard
Some colors come with a gift box and clip.
Switch and color reference:
The following size of LED and driver (not included) fit this host: LED plate:Diameter 16mm Driver:Diameter 17mm
Notice: LED and driver are not included, you should use LED with 20mm PCB board and driver with 20mm diameter,height of the component on the driver should not exceed 6mm. We also sell adapters for 17mm components.
Some rewrapped cells may be too thick to fit properly in the light.
The two beam images are before & after applying d-c-fix.
This is D-C-Fix, which is designed to be a premium quality privacy film for windows. It has a super low light blockage rate and therefore is ideal for smoothing out the beam of flashlights. It's great for fixing uneven beams and tint shift issues. The film will also protect the glass from scratches. Note that it acts as a UV light blocker, so don't try to put it on your UV flashlight.
It is a peel-off adhesive and can be applied directly to the glass to give a clean, stock-looking appearance. Cut with scissors or Xacto knife.
*Measurements listed are approximate. The product you receive will likely not be perfectly cut, but it should be within an eighth of an inch. If you have particular needs, feel free to email me beforehand.
These are the same gaskets sold by official the Convoy store. Select the size you need using the variant boxes. Pricing is the same for all variants and is per 1x gasket. There is no minimum order quantity.
The Sofirn C01 is a tiny Keychain light with Yuji High CRI LED emitter. It is designed for finding keys, reading, EDC, etc. It can be operated from a single AAA battery (Alkaline/ NIMH). Rotate the head to turn on / off.
*not all colors are pictured yet, but I hope to update the site in the future
A premium synthetic grease that you can use to lubricate your flashlight threads, switches, o-rings, and everything else that moves. It's food safe and meets USDA guidelines. It also plays nicely with most materials as indicated by the material compatibility chart at the bottom of the description.
Price is per packet.
Food grade and clean
Will not drip, run or evaporate
Impervious to salt water, safe in potable water
Prevents rust and corrosion while reducing friction
Wide temperature range
Compatible with most other greases
Excellent water resistance and rust inhibiting properties