Convoy S11 | GT FC40 4000-5000k | Gray - Mohr Lumens
Convoy S11 | GT FC40 4000-5000k | Gray - Mohr Lumens
Convoy S11 | GT FC40 4000-5000k | Gray - Mohr Lumens
Convoy S11 | GT FC40 4000-5000k | Gray - Mohr Lumens
Convoy S11 | GT FC40 4000-5000k - Mohr Lumens

Convoy S11 | GT FC40 4000-5000k

Regular price $34.95
/
Shipping calculated at checkout.

Specifications

  • Modes: 12 groups, see follow-up description for details
  • Reflector: orange peel
  • Lamp beads: GT FC40 high color rendering LED
  • Drive: Maximum output current of 2.5A, non-PWM,constant current without flicker, built-in temperature control (current slow down function).
  • The number of batteries required: one 26650 or one 18650 lithium battery (not included), there are two 18650 to 26650 O-rings inside. (Requirement: The battery for this flashlight must withstand more than 10A current.)
  • Luminous flux: 2000-2500LM
  • Color temperature: 5000-5500K (basically white light) / 4000-4500K (neutral white light, yellowish light color)
  • Color rendering index: above 90
  • Illumination: Maximum 17.5KCD
  • Range: up to 265 meters
  • Light emitting angle of whole spot: 87 degrees
  • Central spot light angle: 40 degrees
  • Diameter: 33mm
  • Length: 139mm
  • Net weight: 167g

12 group operating instructions:

  1. click the switch to turn the flashlight on/off,tap the switch to select mode
  2. if flashlight is turned on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and "tap the switch in the flashing process" means to select the option.)

Option 1

(normal-flash 1 time + buzz-flash): tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2.


sub-option 1.1 (normal-flash 1 time) :
tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check)

sub-option 1.2 (normal-flash 2 times) :

tap the switch to select mode group 2 (0.1%, 1%, 10%, 35%, 100%)

sub-option 1.3 (normal-flash 3 times) :

tap the switch to select mode group 3 (100%, 35%, 10%, 1%, 0.1%)

sub-option 1.4 (normal-flash 4 times) :

tap the switch to select mode group 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS)

sub-option 1.5 (normal-flash 5 times) :

tap the switch to select mode group 5 (1%, 20%, 100%)

sub-option 1.6 (normal-flash 6 times) :

tap the switch to select mode group 6 (100%, 20%, 1%)

sub-option 1.7 (normal-flash 7 times) :

tap the switch to select mode group 7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)

sub-option 1.8 (normal-flash 8 times) :

tap the switch to select mode group 8(0.1%, 1%, 10%, 50%)

sub-option 1.9 (normal-flash 9 times) :

tap the switch to select mode group 9 (50%, 10%, 1%, 0.1%)

sub-option 1.10 (normal-flash 10 times) :

tap the switch to select mode group 10 (1%, 10%, 35%, 100%)

sub-option 1.11 (normal-flash 11 times) :

tap the switch to select mode group 11 (100%, 20%, strobe)

sub-option 1.12 (normal-flash 12 times) :

tap the switch to select mode group 12(100% only)
  

Option 2

(normal-flash 2 times + buzz-flash): tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter into the last mode.

Battery-check  instructions:
 <2.95V    1 flash,
2.95-3.25V  2 flashes,
3.25-3.55V  3 flashes,
3.55-3.85V  4 flashes,
>3.85V     5 flashes

You may also like