The Sofirn SP36 is a powerful 3x18650 flashlight. It uses 4x Samsung LH351D LEDs. This variant runs Anduril, the popular open source firmware by community member Toykeeper. It also supports USB-C charging.
Button top cells are required for this flashlight. Some variants come with 3x 3000mAh batteries.
Note: The images may only depict the SP36s variant, but the BLF variants are visually identical aside from a different engraving on the head.
Uses four powerful LEDs with a lifespan of 50,000 hours
Working Voltage: 2.8V-4.2V
Battery Options: three 18650 Li-ion batteries
Dimension: 126.7mm (length)× 50mm (head diameter)
Weight: 300±5 gram (without batteries)
Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to Military Grade Specification type Ⅲ hard-anodized anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
Toughened mineral glass lens with AR coating - scratch and wear resistant
Reverse polarity protection from improper battery installation
Specs: Color temperature: 4000-4500K Mode: 1%-10%-40%-100% (double-click the side to press the switch---->burst), the maximum output is 4A Switch: tail forward switch to control on or off, side switch control mode Reflector: glossy cup aluminum alloy, maximum diameter 67.8mm, height 48.2mm LED: GT-FC40 20mm DTP copper plate, maximum luminous flux 3000-3500LM Maximum range: ANSI 734 meters Maximum intensity: 135KCD Waterproof rating: IPX6 Battery: L6 uses two 26650 batteries to supply power, please note that batteries and chargers are not included Head diameter: 75mm Outer diameter of battery tube: 35mm Inner diameter of battery tube: 27mm Flashlight length: 255mm Weight: 550g
Not all colors will thread together. Convoy is currently transitioning to a new thread type, so some lights have the old style and some have the new style. If you need to lego them together, please send me an email to make sure color x will be compatible with color y. This issue will be remedied when the thread transition is complete.
A host for the S2+ platform. It includes:
1*OP or SMO reflector (see pictures for reference),1*pill,1*head O ring,1*glass,1*spring,1*lanyard
Some colors come with a gift box and clip.
Switch and color reference:
The following size of LED and driver (not included) fit this host: LED plate:Diameter 16mm Driver:Diameter 17mm
Gray has square threads, silver and orange has trapezoidal threads.
A short body tube for Convoy S2+ flashlights which will allow the use of 18350 batteries.
Important: It has been brought to my attention that these tubes are not exactly the same internal diameter at the original 18650 tube. This means some (if not all) protected 18350s, or anything with a thick wrapper may not fit. Unfortunately there is nothing I can do about this, that's just how Convoy makes them.
The two beam images are before & after applying d-c-fix.
This is D-C-Fix, which is designed to be a premium quality privacy film for windows. It has a super low light blockage rate and therefore is ideal for smoothing out the beam of flashlights. It's great for fixing uneven beams and tint shift issues. The film will also protect the glass from scratches. Note that it acts as a UV light blocker, so don't try to put it on your UV flashlight.
It is a peel-off adhesive and can be applied directly to the glass to give a clean, stock-looking appearance. Cut with scissors or Xacto knife.
*Measurements listed are approximate. The product you receive will likely not be perfectly cut, but it should be within an eighth of an inch. If you have particular needs, feel free to email me beforehand.
There was an error signing up for restock notifications. Please try again.
This is a 3D printed display stand, similar to the wooden one I have in the store except 3D printed. The infill pattern is exposed on some of these because I think it looks cool. New versions may be added as I make more.